Skip navigation
Please use this identifier to cite or link to this item: https://libeldoc.bsuir.by/handle/123456789/40871
Title: Исследование свойств растягиваемой ленты в условиях деформации
Other Titles: Study on the properties of stretchable belt under deformation
Authors: Вышинский, Н. В.
Keywords: доклады БГУИР;гибкое звено;шкив;угол охвата;усилие натяжения;угол скольжения;упругие деформации;flexible link;pulley;coverage angle;tension force;sliding angle;elastic deformations
Issue Date: 2020
Publisher: БГУИР
Citation: Вышинский, Н. В. Исследование свойств растягиваемой ленты в условиях деформации / Вышинский Н. В. // Доклады БГУИР. – 2020. – № 18 (6). – С. 11–17. – DOI : http://dx.doi.org/10.35596/1729-7648-2020-18-6-11-17.
Abstract: Целью настоящей работы является теоретическое исследование контактного взаимодействия предварительно натянутой гибкой упруго растяжимой ленты с неподвижным шкивом. Рассматривается случай линейного распределения по длине дуги охвата удельного давления со стороны шкива на ленту. Для этого случая получено выражение для усилия натяжения ленты, распределяющегося по дуге охвата. Показано, что для гибкого звена в виде ленты в пределах дуги охвата присутствуют два вида участков: два симметрично расположенные участки упруго деформируемой ленты, соответствующие дугам скольжения, и расположенный между ними участок недеформируемой ленты. При определенных условиях недеформируемый участок ленты отсутствует, т. е. лента упруго деформируется в пределах всей дуги охвата, которая в этом случае является дугой скольжения. Выполненные теоретические исследования контактного взаимодействия упруго деформируемого гибкого звена с неподвижным шкивом выявили эффект независимости длины дуги скольжения, т. е. деформируемого в зоне охвата участка гибкого звена, от усилия натяжения. Длина этого участка определяется углом охвата и коэффициентом трения для материалов гибкого звена и шкива. Полученные результаты дополняют сведения о механике взаимодействия гибкого звена с ведущим и ведомым звеньями ременной передачи и позволяют получить дополнительные сведения о явлении упругого скольжения, возникающего в этих передачах.
Alternative abstract: The purpose of this work is to theoretically study the contact interaction of a pre-stretched flexible elastic tensile belt with a fixed pulley. The case of linear distribution of the specific pressure from the pulley on the belt along the length of the coverage arc is considered. For this case, an expression is obtained for the belt tension force distributed along the coverage arc. It is shown that for a flexible link in the form of a tape, there are two types of sections within the coverage arc: two symmetrically arranged sections of an elastically deformable tape corresponding to the sliding arcs, and a section of a non-deformable tape located between them. Under certain conditions, there is no non-deformable section of the tape, i.e. the tape is elastically deformed within the entire coverage arc, which in this case is a sliding arc. Theoretical studies of the contact interaction of an elastically deformable flexible link with a fixed pulley have revealed the effect of independence of the length of the sliding arc, i.e., the flexible link that is deformed in the coverage area, from the tension force. The length of this section is determined by the angle of coverage and the coefficient of friction for the flexible link and pulley materials. The results obtained add to the information about the mechanics of interaction of the flexible link with the leading and driven links of the belt drive and allow you to get additional information about the phenomenon of elastic sliding that occurs in these gears.
URI: https://libeldoc.bsuir.by/handle/123456789/40871
Appears in Collections:№ 18(6)

Files in This Item:
File Description SizeFormat 
Vyshinskiy_Issledovaniye.pdf601.96 kBAdobe PDFView/Open
Show full item record Google Scholar

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.