Skip navigation
Please use this identifier to cite or link to this item: https://libeldoc.bsuir.by/handle/123456789/47782
Title: Ускоренные испытания транзисторов большой мощности на длительную наработку при решении задач прогнозирования их надежности методом имитационных воздействий
Other Titles: Accelerated Testing of High Power Transistors for Long Operation when Solving Problems of Prediction of their Reliability by the Method of Imitation Simulation
Authors: Казючиц, В. О.
Калита, Е. В.
Боровиков, С. М.
Бересневич, А. И.
Keywords: доклады БГУИР;биполярные транзисторы;ускоренные испытания;имитационное моделирование;bipolar transistors;gradual failure reliability;long operating time;accelerated testing;simulation model
Issue Date: 2022
Publisher: БГУИР
Citation: Ускоренные испытания транзисторов большой мощности на длительную наработку при решении задач прогнозирования их надежности методом имитационных воздействий = Accelerated Testing of High Power Transistors for Long Operation when Solving Problems of Prediction of their Reliability by the Method of Imitation Simulation / Казючиц В. О. [и др.] // Доклады БГУИР. – 2022. – Т. 20, № 4. – С. 36–43. – DOI : https://doi.org/10.35596/1729-7648-2022-20-4-36-43.
Abstract: При оценке индивидуальной надежности полупроводниковых приборов по постепенным отказам для заданной наработки прогнозируют значение электрического параметра конкретного экземпляра для этой наработки, используя метод имитационных воздействий. Для получения прогноза электрического параметра надо иметь имитационную модель в виде функции связи заданной наработки с уровнем имитационного воздействия. Имитационную модель получают с помощью предварительных исследований (обучающего эксперимента) обучающей выборки полупроводниковых приборов интересующего типа объемом примерно 50…100 экземпляров. Применение модели сводится к расчету уровня имитационного воздействия, соответствующего заданной наработке. Результат измерения электрического параметра при рассчитанном уровне имитационного воздействия у нового однотипного экземпляра, не принимавшего участия в обучающем эксперименте, следует считать прогнозом этого параметра для заданной наработки. Составной частью предварительных исследований по получению имитационной модели являются испытания полупроводниковых приборов обучающей выборки на длительную наработку, которая может составлять десятки тысяч часов, что обусловливает необходимость планирования и проведения ускоренных испытаний. В статье обоснованы условия проведения ускоренных форсированных испытаний применительно к биполярным транзисторам большой мощности типа КТ872А. В качестве факторов, ускоряющих испытания, выбраны повышенная температура и обратное напряжение, прикладываемое к коллекторному переходу транзисторов. Рассчитан коэффициент ускорения испытаний относительно рабочего режима работы транзисторов. По результатам ускоренных испытаний для электрического параметра (напряжение насыщения коллектор–эмиттер) получена математическая модель в виде зависимости его среднего значения от наработки. Наличие этой модели необходимо для определения функции пересчета заданной наработки транзисторов на значение имитационного воздействия.
Alternative abstract: When evaluating the individual reliability of semiconductor devices by gradual failures for a given operating time, the value of the electrical parameter of a particular instance for this operating time is predicted using the simulation method. To obtain a prediction of an electrical parameter, it is necessary to have a simulation model in the form of a function of the relationship between a given operating time and the level of simulation impact. The simulation model is obtained with the help of preliminary studies (training experiment) of a training sample of semiconductor devices of the type of interest with the volume of approximately 50 ... 100 copies. The application of the model is reduced to the calculation of the level of simulation impact corresponding to a given operating time. The result of measuring the electrical parameter at the calculated level of the imitation impact in a new specimen of the same type that did not take part in the training experiment should be considered as a prediction of this parameter for a given operating time. An integral part of the preliminary research to obtain a simulation model is the testing of semiconductor devices of the training set for a long operating time, which can be tens of thousands of hours, which necessitates planning and conducting accelerated tests. The article substantiates the conditions for conducting accelerated forced tests in relation to high-power bipolar transistors of the KT872A type. The increased temperature and the reverse voltage applied to the collector junction of the transistors are chosen as factors accelerating the tests. The test acceleration coefficient is calculated relative to the operating mode of the transistors. Based on the results of the accelerated tests for the electrical parameter (collector-emitter saturation voltage), a mathematical model was obtained in the form of a dependence of its average value on the operating time. The presence of this model is necessary to determine the function of recalculating the given operating time of transistors to the value of the simulation impact.
URI: https://libeldoc.bsuir.by/handle/123456789/47782
Appears in Collections:№ 20(4)

Files in This Item:
File Description SizeFormat 
Kazyutchits_Uskorennyye.pdf384.93 kBAdobe PDFView/Open
Show full item record Google Scholar

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.