Skip navigation
Please use this identifier to cite or link to this item: https://libeldoc.bsuir.by/handle/123456789/66207
Title: Способ определения скорости воздушного потока на основе анализа амплитуды шумовых импульсов
Other Titles: A method for determining air flow velocity based on the analysis of the amplitude of noise pulses
Authors: Зеневич, А. О.
Кочергина, О. В.
Терех, И. Л.
Keywords: доклады БГУИР;шумовые диоды;воздушные потоки;амплитуды импульсов
Issue Date: 2026
Publisher: БГУИР
Citation: Зеневич, А. О. Способ определения скорости воздушного потока на основе анализа амплитуды шумовых импульсов = A method for determining air flow velocity based on the analysis of the amplitude of noise pulses / А. О. Зеневич, О. В. Кочергина, И. Л. Терех // Доклады БГУИР. – 2026. – Т. 24, № 5. – С. 69–75.
Abstract: Исследована возможность использования шумовых диодов в качестве чувствительных элементов термоанемометров. Экспериментально установлена зависимость среднего значения амплитуды шумовых импульсов от температуры и скорости воздушного потока для моделей диодов ND102L и ND103L. Показано, что при постоянном напряжении смещения, соответствующем напряжению пробоя шумового диода при максимальной температуре из исследуемого диапазона, увеличение скорости охлаждающего воздушного потока приводит к линейному росту амплитуды шумовых импульсов. Определена чувствительность предлагаемого способа, составившая 156,9 мВ⋅с/м для диода ND102L и 105,9 мВ⋅с/м для ND103L. Выполнено сравнение амплитудного способа измерения скорости с частотным. Установлено, что предложенный амплитудный способ обеспечивает меньшую погрешность (4,5 % для ND102L и 2,1 % для ND103L), более высокое быстродействие и простоту аппаратной реализации, что делает его перспективным для применения в компактных измерительных устройствах реального времени.
Alternative abstract: The possibility of using noise diodes as sensing elements of hot-wire anemometers was investigated. The dependence of the average value of the noise pulse amplitude on the temperature and air flow velocity was experimentally established for the ND102L and ND103L diode models. It was shown that, at a constant bias vol tage corresponding to the breakdown voltage of the noise diode at the maximum temperature in the studied range, an increase in the cooling air flow velocity leads to a linear increase in the noise pulse amplitude. The sensitivity of the proposed method was determined to be 156.9 mV·s/m for the ND102L diode and 105.9 mV·s/m for the ND103L diode. A comparison of the amplitude method of velocity measurement with the frequency method was performed. It was found that the proposed amplitude method provides a lower error (4.5 % for ND102L and 2.1 % for ND103L), higher speed and simplicity of hardware implementation, which makes it promising for use in compact real-time measuring devices.
URI: https://libeldoc.bsuir.by/handle/123456789/66207
DOI: http://dx.doi.org/10.35596/1729-7648-2026-24-5-69-75
Appears in Collections:Том 24, № 5

Files in This Item:
File Description SizeFormat 
Zenevich_Sposob.pdf400.52 kBAdobe PDFView/Open
Show full item record Google Scholar

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.